Packaging:25 kg 3-ply paper / HDPE moisture-resistant bags and 500 kg / 1000 kg jumbo bulk bags with bottom discharge
Product Code:VVB-MS-01
Quality Certification: MTC & NABL Tested
Approved Authorities:BMC, CIDCO, MMRDA, NHAI, PWD
Concrete Admixture & Mineral MaterialsIS / ASTM Certified
MICRO SILICA
High Purity Amorphous Silica Fume (SiO₂ ≥ 92.5%)
High-performance pozzolanic mineral admixture conforming to ASTM C1240 and IS 15388. Drastically enhances compressive strength, reduces permeability, and prevents chloride penetration in high-durability concrete.
Key Technical Highlights & Authorizations
Imported (China & Malaysia):
Indian:
High amorphous SiO2 content (>92%):
Direct Site Dispatch & Bulk Supply
Manufacturer Test Certificates (MTC) and NABL accredited test reports provided with every consignment.
HELP DESK / PRODUCT INQUIRY
Direct support for batch availability, test certificates, commercial rates & site dispatches:
Every bulk dispatch and bagged shipment is accompanied by batch-specific test reports from NABL accredited testing facilities.
Product Overview & Mechanism of Action
Micro Silica (also termed Silica Fume or Condensed Silica Fume) is an ultra-fine pozzolanic mineral admixture produced during the high-temperature reduction of high-purity quartz with coal or woodchips in electric arc furnaces during silicon and ferrosilicon alloy production. With an average particle diameter of 0.15 µm—approximately 100 times finer than typical Portland cement grains—it functions through two simultaneous physical and chemical mechanisms in concrete:
Physical Micro-Filler Effect: Due to extreme fineness, submicron silica spheres fill the interstitial micro-voids between cement grains and within the aggregate-paste interfacial transition zone (ITZ), creating an ultra-dense, homogeneous microstructure.
Chemical Pozzolanic Reaction: The highly reactive amorphous silicon dioxide (SiO₂ ≥ 92.5%) reacts chemically with free calcium hydroxide (Ca(OH)₂ / Portlandite) liberated during cement hydration, converting weak, soluble crystals into dense, insoluble, load-bearing Calcium Silicate Hydrate (C-S-H) gel.
Dosage & Batching Guidelines
The standard dosage of densified micro silica typically ranges between 5% and 10% by weight of cementitious binder, depending on project strength requirements (M50 to M100+) and target chloride impermeability levels. Micro silica should be dry-blended with cement and aggregates for 15-30 seconds prior to water addition, followed by the addition of high-range water reducers (PCE superplasticizers) to ensure optimal deflocculation and dispersion.
Curing & Site Handling
Because micro silica concrete exhibits zero bleeding, exposed surface evaporation must be strictly controlled immediately following compaction and finishing. Prompt wet curing, polythene sheeting, or high-efficiency curing membranes must be applied to prevent plastic shrinkage moisture loss.
Key Technical Features & Engineering Benefits
Micro-filler void filling effect, Secondary pozzolanic C-S-H formation, Exceptional chloride and sulfate resistance, Significant reduction in concrete permeability, High early and ultimate compressive strength
High-rise columns & transfer girders, Marine & coastal splash zones, Bridge piers & metro viaduct segments, Industrial flooring & chemical resistant slabs, Ultra-high-performance concrete (UHPC)
Packaging, Storage Guidelines & Logistics Fleet
Packaging Configurations
25 kg 3-ply paper / HDPE moisture-resistant bags and 500 kg / 1000 kg jumbo bulk bags with bottom discharge
Bagged Cargo: Shrink-wrapped, palletized and covered with waterproof tarpaulins during transit.
Bulk Cargo: Transported via dedicated pressure pneumatic bulkers (25 - 35 MT capacity) for zero spillage and direct silo discharge.
Traceability: Each bag and consignment marked with Batch Number, Date of Manufacture, and Net Weight.
Storage & Shelf Life Recommendations
Store in dry, covered warehouse sheds elevated on wooden pallets off the concrete ground.
Prevent direct contact with moisture, high humidity, and open rainwater to avoid pre-hydration or compaction.
Shelf Life: Typically 12 to 24 months from manufacturing date when stored in original un-opened moisture-proof packaging.
Safety & PPE: Use protective dust masks, safety goggles, and work gloves during batching and mechanical handling.
Government & Public Authority Approvals
V.V. Buildtech supplies materials backed by authorized associations with products pre-approved and vetted across major governmental and public sector infrastructure bodies: