Product Overview & Engineering Principle
PP Macro Fibers are high-tenacity, continuously embossed structural synthetic fibers manufactured from 100% virgin polypropylene and polyolefin copolymers. Unlike micro fibers which primarily address plastic shrinkage during fresh state curing, macro fibers are designed to provide post-crack structural reinforcement. Once the concrete matrix undergoes initial cracking under tensile or flexural loading, the embossed fibers bridge the cracks, distributing stresses uniformly across the crack plane (high residual flexural tensile strength f_R1k and f_R3k as tested per EN 14651 and ASTM C1609).
Structural Welded Mesh Replacement
When used in ground-supported industrial floors, external hardstandings, and road pavements, PP Macro Fibers can completely replace conventional steel welded wire mesh (WWF / BRC mesh). This eliminates labor-intensive steel cutting, fixing, chair spacers, and tripping hazards on site, while accelerating floor placement speed by 30-40%.
Dosage & Batching Sequence
Typical structural dosage ranges from 2.0 kg to 5.0 kg per cubic meter (m³) of concrete, governed by slab thickness, joint spacing, and design wheel loads. Fibers are packaged in degradable/water-soluble pucks and can be added directly into the transit mixer drum at the batching plant or at the job site. Mix at maximum drum speed for 4 to 5 minutes to achieve complete, uniform, three-dimensional dispersion without clumping or balling.