Packaging:100 g & 125 g bags for plaster mixers; 900 g (0.9 kg) dispersible paper pouches packed in 18 kg / 20 kg master export corrugated cartons.
Product Code:VV-PPMIC-12
Quality Certification: MTC & NABL Tested
Approved Authorities:BMC, CIDCO, MMRDA, NHAI, PWD
Concrete FibersIS / ASTM Certified
PP MICRO FIBER
IS 16481 / ASTM C1116 Type III Monofilament Micro Synthetic Fibers for Anti-Crack Control
100% virgin polypropylene monofilament micro fibers engineered to eliminate up to 90% of plastic shrinkage and settlement micro-cracks in concrete, floor screeds, and wall plasters. Dispersing into over 150 million individual reinforcing fibers per kilogram, it establishes an isotropic 3D micro-network that elevates cohesion, reduces water absorption, increases impact durability, and provides critical fire spalling protection.
Key Technical Highlights & Authorizations
Fiber Count: > 150 Million fibers per kg for isotropic micro-reinforcement
Shrinkage Control: Reduces plastic shrinkage & settlement cracking by 85–95%
Every bulk dispatch and bagged shipment is accompanied by batch-specific test reports from NABL accredited testing facilities.
Product Overview & Action Mechanism
PP Micro Fibers are ultra-fine monofilament fibers manufactured from 100% virgin polypropylene homopolymer. During the initial setting and plastic stages of concrete and mortar (the first 2 to 24 hours), water evaporation causes tensile capillary stresses that exceed the zero tensile capacity of fresh paste, resulting in plastic shrinkage cracks. PP Micro Fibers distribute uniformly throughout the matrix with over 150 million fibers per kilogram, physically arresting and bridging micro-capillary cracks before they can coalesce into visible surface fissures.
In internal and external wall plastering, PP Micro Fibers replace conventional chicken wire mesh. They prevent crazing, map cracking, and hollow debonding against masonry backgrounds, while improving trowel cohesiveness, reducing rebound loss, and enhancing long-term water tightness.
Passive Fire Spalling Resistance
In high-strength concrete subjected to fire, dense concrete can suffer explosive spalling due to trapped steam pressure. Polypropylene micro fibers melt at approximately 160°C to 165°C, leaving behind microscopic interconnected relief channels that safely vent vapor pressure without compromising structural integrity.
Key Technical Features & Engineering Benefits
Plastic Shrinkage Mitigation
Inhibits up to 95% of plastic shrinkage and settlement micro-cracking in early curing.
Uniform 3D Dispersion
Over 150 million filaments per kilogram provide micro-reinforcement every 1 mm³ of concrete.
Zero Corrosion & Rust-Free
100% chemically inert against alkali, acids, and atmospheric moisture.
Enhanced Water Tightness
Blocks interconnected capillary pore pathways, substantially reducing water absorption.
Passive Fire Spalling Protection
Vaporizes above 160°C to create micro-relief vents that relieve destructive steam pressure.
Superior Plaster Workability
Replaces chicken wire mesh, reducing plaster rebound loss and eliminating hollow plastering.
Dry-mix repair mortars, non-shrink grouts, and gunite/shotcrete applications
Packaging, Storage Guidelines & Logistics Fleet
Packaging Configurations
100 g & 125 g bags for plaster mixers; 900 g (0.9 kg) dispersible paper pouches packed in 18 kg / 20 kg master export corrugated cartons.
Bagged Cargo: Shrink-wrapped, palletized and covered with waterproof tarpaulins during transit.
Bulk Cargo: Transported via dedicated pressure pneumatic bulkers (25 - 35 MT capacity) for zero spillage and direct silo discharge.
Traceability: Each bag and consignment marked with Batch Number, Date of Manufacture, and Net Weight.
Storage & Shelf Life Recommendations
Store in dry, covered warehouse sheds elevated on wooden pallets off the concrete ground.
Prevent direct contact with moisture, high humidity, and open rainwater to avoid pre-hydration or compaction.
Shelf Life: Typically 12 to 24 months from manufacturing date when stored in original un-opened moisture-proof packaging.
Safety & PPE: Use protective dust masks, safety goggles, and work gloves during batching and mechanical handling.
Government & Public Authority Approvals
V.V. Buildtech supplies materials backed by authorized associations with products pre-approved and vetted across major governmental and public sector infrastructure bodies: